Quote:
Originally Posted by 1966geeto
Does the clamp compensate for diff in od sizes ? when you slip the pipe in the wider side how does the clamp seal the difference in the pipe overlap, and if you do not have a slip joint can you use them to fit 2 pipes of the same sixe butted up to each other ?
|
To seal the type of joint you're speaking of you'd use a stepped band clamp. The stepped clamp conforms to both the large/small OD of the joint.
If you were sealing a butt style joint you'd use a straight band clamp which is the same diameter for the length of the clamp.
__________________
1970 GTO-vert, 461, eheads, stump puller, m20, 3.42
