Nice numbers. I agree with above remarks in regards to H/P. I have two engines 455 .030 that made 600 H/P and 600torque with KRE D- port heads. We used the Torker 2 intakes. Found no difference with the RPM intake. Performed the same. I ran 950 quickfuel carbs on both engines. What carb was used on dyno? What was your compression ratio? What was your total timing?
Timing on both engines was right around 32 deg total for us. I see you have 1.65 rockers. We ran just the 1.5 ratio rockers. Cam we used was SD performance Road paver. 246/252 dur @ .050" lift .608"/.608" lift with 1.52 ratio rockers 112 or 114 lobe sep Only difference we ran Crower solid roller lifters on both engines.
Last edited by chuckies76ta; 09-24-2021 at 09:06 AM.
|