[chiphead]

I have (2) TH350s for sale. Both are short tail BOP bellhousing. I'm going TH400 and don't need these.

Built TH350 $1100 OBO

The first was rebuilt by me in about 2018 and never used. It has most of the upgrades for a high HP Lemans/GTO.
hardened input shaft
36 element intermediate sprag and hardened race
4L60E bolt-in center support
pistons machined for 5 clutches
quality clutches/steels
performance clearances
all new bushings/bearings/seals
Transgo stage 2 shift kit for auto or manual shifting.
cast aluminum deep pan
red stripe modulator
replacement gov with yellow springs
Comes with extra tailhousing, apply pistons cut for 5 frictions and a box of gaskets and small bits.


Built but damaged TH350 $200 OBO

The other tranny is built just like the first, except it has a stock input shaft, stock TH350 intermediate sprag and hardened race. It was run street/strip for a few years. The tranny rolled the sprag and cracked the bellhousing on a nitrous pass, so it's parts only. Most of the internals, VB and pan still good. Could be fixed with an ultrabell.

Buy both for $1000. Act now and I'll throw in the home-made holding fixture that fits an engine stand. Both trannys are in the Aiken SC/Augusta GA area. Local pickup only. PM if interested.