Quote:
Originally Posted by 73 TRANSAM
I removed my booster on my 1050 dominator by screwing a screw on that banjo from the metering block side and pulling the screw with a vise grip. Then the booster just slides out from the top. Then just reverse the step for installation. I used a special grease that came with my kit. Not sure what is it, looks like a very thin red lube. Good luck.
|
Very common to do it that way and at one time you could buy the booster "retention" inserts, if you screwed on up on removal.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|