View Single Post
  #12  
Old 10-03-2021, 06:29 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,294
Default

1) #6213 800 CFM Carbs use "Center Hung Float Bowls that can be swapped on a 650 cfm #6210 carb and metering blocks.

2) The accelerator pump discharge hole from the #6213 "Center Hung Float Bowls" is in a different location vs the normal 650 to 850 square bore carbs bowls.

3) The metering blocks are also different between square bore carbs and spread bore carbs BUT the metering blocks interchange between the 650 and 800 spread bore carbs once you change the Jetting and Power Valves.

4) The Dual Bowl Fuel Line is also unique to spreadbore carbs.

5) All of the spread bore carbs use the "Johnson" (a Holley VP's) primary/secondary double pumper linkage design.

Tom V.
Attached Thumbnails
Click image for larger version

Name:	#6213 Top View.jpeg
Views:	211
Size:	51.0 KB
ID:	574311   Click image for larger version

Name:	#6213 Fuel Bowls.jpeg
Views:	197
Size:	70.3 KB
ID:	574312   Click image for larger version

Name:	#6213 Air Horn.jpeg
Views:	185
Size:	53.2 KB
ID:	574313  

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
The Following User Says Thank You to Tom Vaught For This Useful Post: