'66 GTO Convertible
'74 455 .030 over
Stock Nodular crank
Scat H beam rods
Ross forged pistons
KRE 290 D ports 85CC
10.5:1 CR
Dougs headers
3" Pypes X system with dumps, Race Flo mufflers
Crane 289621 HR (222/230 .509/.528)
HS 1.65 roller rockers
Aluminum '66 tripower intake, ported by CVM.
Jet "Circle Track" center carb, ported end carbs
Dave's small body HEI with MSD 6AL. 16 initial, 20 mechanical and 8 vac.
Tremec TKO600
Moser 12 bolt 4:10
It idles smoothly at 800 rpm, tons of torque from off idle to rev limiter (6200) It pulls 20" of vac at idle with the vacuum advance connected, and 16 without.
__________________
'66 GTO convertible. 462, KRE 290 cfm Dports, SD "Old Faithful" hydraulic roller, CVM ported aluminum Tripower, TKO600, Moser 12 bolt
"I open up three deuces, I'm Never Coming Back!"
|