Updates:
1. Rechecked end play AFTER mains torqued down. 0.007-0.0075
2. Rechecked rod side clearance on one pair installed with feeler gage between rods. 0.029".
Not too worried about the larger side clearance. Bearing clearance is good so there is the right combination of flow and pressure. Have read where the aftermarket rods are a bit narrower than stock.
__________________
1970 GTO 400 Atoll Blue, PS, PDB, A/C
Was M20 4 speed, now has Keisler RS600 5 speed.
|