Quote:
Originally Posted by Tim Corcoran
I jerked the bore on one bank to give me more thickness on the thrust side plus put plenty of hard block to stiffen things up. I think it will be plenty strong, time will tell.
|
So if I correctly understand what was done. Now where the bore cylinder center line from each bank meet at 90 degrees is no long at the crank main journal center line.
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm