Quote:
Originally Posted by NeighborsComplaint
That and I can give the pump the "If you don't perform you can be replaced" talk.
The "boat hatch" is not for me. I just threw it out there. A GM metal body plug measures 4-5/8" x 3-11/16". I don't know if that is large enough or if enough clearance exists to rock the pump/sending unit assembly out through that opening even leaving a minimal flange to screw or seam seal it to. I'll measure the flange on the tank when it arrives but I'm guessing it's not going to work but I can always mock it up with cardboard and see.
|
Not to mention limited access to the flange mounting bolts.