Quote:
Originally Posted by takid455
Currently, I do not have a crank. Have everything else. Part of the reason of asking the original question.
Heads are 16 rdpt
Cam. HR version of the HO racing HC03 (240/250) @50.
Stick with DN 4+1. 273 rear. 27 or 26" tire
Sent from my LG-G710 using Tapatalk
|
Stick, that’s a good thing, because with HO03 cam and automatic your stall would be up there closer to 3800- 4000 and not really very street able for just a Cruiser.
It’s a great cam I ran it with #96 d-port heads if your just going to be cruising with it should be fine. The only problem I see is the 273 gear, it’s going want to make peak torque around 3800+. Definitely much better with at least 3.73 gear. It’ll be a dog on the bottom end, but have all kinds of top end. As far as crank goes, and trying to used the SD rods which have stock Pontiac rod Journal your going to be limited. On crank choice. Even buying aftermarket crank. Not much choice on cranks with stock rod journals out.