The Edelbrock heads configuration moves the Exh valve over .040" closer to that side of the cylinder to allow a straighter path for the Intake port .
Even with that being considered, that motor must of been running a good amount of lift to cause the Exh valves to kiss the piston notches!
I hope you are building this motor for racing because you will need to spin to up to 7500 rpm to make good usage of those heads 215 CC Intake ports!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|