Quote:
Originally Posted by Derekm803
I'm at timing cover/oil pan part of putting it back together. My kit has a couple rubber rear gaskets(main cover has a groove). They have the tips to pull through the oil pan but my factory pan don't have the slots to pull em through.
Y'all talking bout the cork there, too. I do have a piece of cork in my kit that is the exact width of the main cap groove, is thicker than the rubber gaskets and is a bit longer than is needed to go there. It's not as wide as the cork I've seen the pics. Kinda confused there.
|
If your rear main cap has a groove in it the cork seal you have will work you should trim it carefully to the correct length my rear main cap did not have a groove in it so I bought a piece of 3/16 rubber impregnated cork and made my own seal it’s probably around an inch or more wide. And worked perfectly not leaks at all got a couple hundred miles on it now.