Brian. The bearings do have grease in them. They are also self centering. Some grease must have escaped the seal. Bearing should be replaced. As for grease on the bearing where it touches the pressure plate forks is a No. I think you should also replace your clutch release fork.
__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
|