View Single Post
  #3  
Old 08-24-2021, 03:41 PM
steve25's Avatar
steve25 steve25 is offline
Ultimate Warrior
 
Join Date: May 2008
Location: Westchester NY
Posts: 14,781
Default

I have a few of those early rods left from a motor that had them in them and two of them let go at only 5000 rpm on the street!
I had polished them , took a ton of weight off the balancing pad on the big end and the shop that resized them installed ARP bolts also.

I hope you running them in a motor with less then a the 4.21” of a 455 like I ran mine in, other wise I would resell those and get the cheapest new manufactured forged rod and them you’ii be safe from losing a whole short block like I did!

__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!

1) 1940s 100% silver 4 cup tea server set.

Two dry rotted 14 x 10 Micky Thompson slicks.

1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.

Education is what your left with once you forget things!