If you take some measurements. You should then be able to calculate what size shim is needed to get what pressure increase.
► seat_pressure = 60 psi
► new_spring_pressure = 67 psi
► spring_rate = 100 PSI per Inch
► (new_spring_pressure - seat_pressure) / spring_rate = 0.070" shim
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm
|