View Single Post
  #34  
Old 03-07-2020, 09:20 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,294
Default

Info on the 1966 Rear Carb Calibration: 7024179

The 1966 Pontiac Tri-Power Carburetors information, as requested.
(For verification of the Carburetor Calibrations that you have on your 1966 Engines.

I will post the Rear Carb: 7024179 info now. Same format, again, from the Rochester Products People
in the way the information is presented by them.

Air Horn Number: 7013885 (1)
Venting: Internal 3/16" dia in scoop
External Venting: None
Support: None
Needle Seat: 7027846 Size: .086:
Float Valve: 7022782 Pull Clip: None
Float Assembly: 7012028 Spring: None
Fuel Level: .720" at 6.0 psi
Mech. Setting: .640" Drop: 1.97"
(to sharp edge of seam at toe of float)
Pump Assem: 7020584 (synthetic)
RET Spring: 7004597 Size: .025"
DUR Spring: 7011385 Size: .045"
Pump Rod: 7013276 Length 2-3/4"
Pump Jet: drill (2) Size: .030"
Jet Location: In Cluster
CAP cc/10 strokes: 15.0 - 18.0
Rod Set: .600 from air cleaner flange surface to top of pump rod
Power Piston Assy: None
act spring (blank) Oz Color (blank)
Power Valve Assy: None
Power Rest: None Size: (blank)
Metering Rod: (blank) Spring: (blank)
Rod Size, Power (blank) Econ: (blank)
Cut-In down at: (blank) "Up" at: (blank)

MM. Jets: 390 cc, 60 degree, 7008668 "C"

Choke Housing: None (The next 14 lines available for the Choke Description are blank)

Float Bowl (Finish) Float Bowl and Body Number: 7013258
Venturi Size: 1-5/16"
Cluster: 7016687 Boost Size: 1/8
Nozzle: 7015151 rel zero
Idle Tube: None Size: (blank)
Channel Rest: None Size: (blank)
Hi-Speed Bleed: drill (2) Size: .034
L.I.A.B: None
Idle Bleed: None
Top Bleed: None
Side Bleed: None
Insert: (2) 7008866 (trumpet)
Radial Tubes: (blank) Size: (blank)
Crossover Chan: None Main Well Chan: None

Throttle Body Assem: 7027768 (2*)
Body & Bowl Assem: (blank)
Thr Body No: 7025611 Bore: 1-11/16
Thr Valve: 7027791 Angle 15 degrees
Idle Needle: None
Idle Needle Orifice:
All drilling info is blank

So here is the last part of the document (mostly just final Info)
Other: 7013264 thr shaft & lever assy
7015106 throttle body gasket

thr shaft offset .027 - .033

no spark port info

Test Specification 7022221

Min Air .95/ lbs min max
Box Balance 18" Hg - 3" Hg
(Note all 2 BBL carbs are tested at 3" of mercury (TV)

Remarks: (1*) 7013249 needle seat screen
7013250 pump shaft & lever assy cast baffle in air horn 7021007 air horn

(2*) 7013783 throttle lever return spring "dag" treatment on throttle valves.
throttle valves in vertical position at wot.

(3*) 7024953 pump squirter deflector installed over cluster

date 9-3-1963
Customer 1964 2G Pontiac 389 cu in A/T & Syn (Front)
Pow. Pak for Pow Pak assys 7024172 & 7024174
Model 7024179 Similar to 7024079

IT IS INTERESTING THAT THERE IS NO MENTION OF THE MECHANICAL LINKAGE TRI-POWER PARTS ON THIS 1966 APPLICATION


Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.