View Single Post
  #86  
Old 12-13-2017, 07:47 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,294
Default

Doing Great. Sounds like you have the basic idle Fuel/ Air right where you want it. Is your meter a Lamda meter (fuel/air) or a Air/Fuel meter.?
You reported 14.7 to 1. Assume Air/fuel.

You could have slightly more height vs width on the Transfer Slot window and be able to back off the Secondary Screw to 5/8 or 3/4 turn from zero. Then you might have a SLIGHT tension on the Primary Screw (There should be some light tension on the Primary Screw spring to hold the Primary Screw in place (keep it from moving).

Sounds like you are real close on the idle mixture and ready for the Transfer Slot/ Transition portion of the off idle curve.

Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.