Quote:
Originally Posted by Mike Davis
You will need the 64-67 arms. The ears on the housing are in the same place, you need the control arms for the chassis used.
I would look at either BMR or UMI.
|
And to add to Mike's comment, if you get UMI (which I recommend), get their "roto-joint" style bushings to reduce binding. Don't use regular polyurethane bushings in this location.
https://www.umiperformance.com/home/...s-roto-joints/
__________________
1966 Pontiac GTO (
restoration thread)
1998 BMW 328is (
track rat)
2023 Subaru Crosstrek Limited (
daily)
View my photos: Caught in the Wild