Quote:
Originally Posted by Hooter
I have a tall deck IA2(11.00 deck height) with standard height cam tunnel. For future reference, what’s the biggest arm that will fit in it? I had less than stellar results(piston scuffing) with a 4.75 stroke in a standard deck height motor, but have more room to work with on this motor. No immediate build plans, but the recent post on a 4.5 stroke crank got me thinking about this again. The torque on the street with the 4.75 crank was unreal. Like to go bigger if possible. Will run steel rods.
|
Depends on what diameter cam you run...