JC ,
If your talking about those little steel studs that hold the plastic clips on that inturn hold your 1/4 panel lower mldgs on . Once all your metal work is done . You need to find a body shop who has a stud gun . They are used to weld metal pulling stud's to dented area's , so you can straighten a dent without drilling holes the old fashioned way . With these stud guns you can weld the metal studs back on your repaired area . They work excellent and look like factory . You have to do these to bare metal , as it will not work over body filler .
__________________
Man is not complete until he's married , then he is finished !
|