Thread: Plastic welding vs filler on Endura bumper?
View Single Post
  #6  
Old 06-18-2021, 02:12 PM
Formulabruce's Avatar
Formulabruce Formulabruce is offline
Ultimate Warrior
  
Join Date: Nov 2004
Location: North East of AMES PERFORMANCE, in the "SHIRE"
Posts: 9,386
Default
Use the 3M 05887
On this nose the jack slipped out of slot as car rolled forward. I decided to eliminate the jack slots. It has 4 coats of SPI Epoxy, which will be blocked and recorded. The 3M 2 part sands very easy and remains flexible. As per Barry at SPI, I stripped the nose to bare rubber before using the epoxy. This filled in tiny cracks and you CAN flex it without cracking.
Attached Thumbnails
Click image for larger version Name: 20210521_171658.jpg Views: 211 Size: 75.2 KB ID: 568422   Click image for larger version Name: 20210609_192553.jpg Views: 197 Size: 39.8 KB ID: 568423  

Last edited by Formulabruce; 06-18-2021 at 02:17 PM.
Reply With QuoteReply With Quote