Quote:
Originally Posted by Pontiac Derek
sounds like the heads might not have been milled perfectly slat leaving a slight Lee bigger gap at the bottom of your intake gasket than the top, or manufacturer error
|
+1
Some manufacturing lots of the RPM needed the head surfaces milled right out of the box to fit.
The silicone on the gaskets when it was removed might have been a clue.
__________________
68 GTO,3860#
Stock Original 400/M-20 Muncie,3.55’s
13.86 @ 100
Old combo:
462 10.75 CR,,SD 330CFM Round Port E's,Old Faithful cam,Jim Hand Continental,3.42's.
1968 Pontiac GTO : 11.114 @ 120.130 MPH
New combo:
517 MR-1,10.8 CR,SD 350CFM E's,QFT 950/Northwind,246/252 HR,9.5” 4000 stall,3.42's
636HP/654TQ
1.452 10.603 @ 125.09
http://www.dragtimes.com/Pontiac-GTO...lip-31594.html