Quote:
Originally Posted by 65nss4spdGTO
So back to the original target here of 1150 HP.
The biggest bore size is 4.400", the stroke is 4.114".
What is the peak RPM?
Calvin Hill
Hill Performance
708-250-7420
|
VE will dictate rpm but I think somewhere between 9200 and 9800 rpm 2.3 could be done.
For gasket consideration I'd go a tid smaller on bore(4.375) and use 4.15 stroke for a 499 displacement . I think a 3.75 stroke short deck at 451 would make 2.3 or better easier... (2.549 per ci at 451 to 1150 hp would be a real stretch unless you hit powerball)