My Nash 5 speed is a 26 spline. Just order a 11" 26 spline clutch disc and you are good to go. Same deal with the output shaft yoke. I had a custom heavy duty driveshaft made with the good joints that matched up to the Ford 9" and the 400 Yoke on the trans output.
Only difference will be the rear axle he plans to run and the u-joint there.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|