Quote:
Originally Posted by mike202
I checked those part numbers at Napa and they are no longer valid. The mounts they say fit a 69 GP are incorrect.
I ended up getting the Ames mounts and they are the correct height. There are two issues however. I had to trim the right side mount to clear the long branch exhaust manifold. Another issue is that the threaded hole that attaches the mount to the frame is only 0.39" deep, so the factory bolts (with the "dog point") will not work. I bought aftermarket bolts and had to use washes to get the mount snug.
|
Sorry that the NAPA part numbers I listed were no longer available. If the mounts you got from Ames required trimming material and/or shimming you need to call them so they can investigate. They should at least put a note in their catalog