Quote:
Originally Posted by CraigG.
Wow - I didn't know that could or did happen - I just thought it was my mistake.
|
Ya I had it happen and caught it right away. It put a few witness marks on the stud griddle. No damage. Just make sure you check the circumference of your poly locks so there all the same size. And also watch the size of the end that fits into the rocker for proper clearance. I run Crower 1.5 Stainless rockers and I used all the Comp cams polylocks. Seeing this happened make sure to check your pushrods to make sure that none are bent.
__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick.
Best so far 10.12@133 mph. 1.43 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exh.
|