You can also get the conversion kit through Speedway Motors. This kit will make you base 2G 2bbl Rochester carbs into front and rear end carbs.
http://www.speedwaymotors.com/Roches...age,22244.html
Here is the link to Stacey David's Gearz from "Speed TV". There are episodes on the right hand side, you can click them in order to watch Stacey talk about and show you how to rebuild the Rochester carbs with the kit from Speedway Motors.
http://staceydavid.com/episodes/tri-powers-six-packs
Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|