When we put the nose on my 70 gto we jacked the front off the ground by the cross member. Install the nose and then let it back on the ground onto the suspension. It would move the nose tighter to the fender. Surprising how much things move around by just jacking the front of the car off the ground. The engine was in the car.Getting the nose where I was content was alot of moving the nose left and right,,,,up and down. And still isn't that great as far as being even and flush everywhere. The nose shrunk length wise over the years. And you can only bring the front of the fenders together just so much because the hood is a certain width. I'm not a body guy and it drove me nuts. I had to walk away and regroup a few times.
__________________
72 lemans,455 e-head, UD 255/263 solid flat,3.73 gears,,,10" 4400 converter,, 6.68 at 101.8 mph,,1.44 60 ft.2007
(cam 271/278 roller)9"CC.4.11gear 6.41 at 106.32 mph 1.42 60 ft.(2009) SOLD,SOLD
1970 GTO 455 4 speed #matching,, 3.31 posi.Stock manifolds. # 64 heads.A factory mint tuquoise ,69' judge stripe car. 8.64 @ 87.3 mph on slippery street tires.Bad 2.25 60ft.Owned since 86'
Last edited by scott70; 03-12-2022 at 12:52 AM.
|