I hope that when the motor was assembled the compression rings where installed with the proper side up so that oil is not scraped into the chamber.
I forget what brand ring it was, but there was a batch of compression rings made maybe 10 to 15 years ago that had the dot marking that signifies the top put on the bottom of the ring!
Anyone remember this issue and the brand?
My money is still on something going on with the valve seals or lack there of due to as you have posted that it does not smoke right away.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
Last edited by steve25; 06-20-2021 at 07:26 AM.
|