Quote:
Originally Posted by Mo
Anyone have an idea of what metal is used for the seats? Also, I added a pic of the throat area and the lip that is there from the core shift. I imagine that could be filled with epoxy to smooth it out.
|
Quote:
Originally Posted by Mo
A closer pic. You can see the ledge/lip with the tool. It shows how the port throat is shifted to the left and the back of the seat is exposed in one spot.
|
That is the "issue" with these heads. Every set we've seen has that in the same port. If you grind the seat back to blend it into the port the seat may become weak and fall out (that is what the supplemental sheet explaining "porting these heads can cause the seats to fall out" is really referring too). You could smooth it with epoxy. The correct fix would be to pull the seat and weld it or you could live with it.