Quote:
Originally Posted by Bill Eveland
I run crower 1.65 rockers and started with a 10.3 and had to go to a 10.4. Also had to use lash caps . That was with standard height hipo crower solid roller lifters as well.
|
My engine has Crower SFT lifters, Crower 1.65 rockers and we bought valves and springs suited to the SFT cam. 1.800 installed height.
My pushrods ended up being 10.100". 10.3 or 10.4 makes sense if you have the taller valves for a roller cam.
Eric