Getting her all oiled up!
Just under .001" to go. This is the vertical measurement.
.001" to go at the 10/4 O'clock position. Almost perfectly round, but not quite there yet.
All done. This is 10/4 o'clock position, #3.
This is vertical position, #3.
This is typical of all of them. Here's #5.
The worse one is within .0002" at the parting line, otherwise they are all 3.1885, + or - .0001" everywhere else.
__________________
Paul Carter
Carter Cryogenics
www.cartercryo.com
520-409-7236
Koerner Racing Engines
You killed it, We build it!
520-294-5758
64 GTO, under re-construction, 412 CID, also under construction.
87 S-10 Pickup, 321,000 miles
99Monte Carlo, 293,000 miles
86 Bronco, 218,000 miles