Quote:
Originally Posted by Steve Barcak
I have most of my machine work done in Chandler at CBA. Talk to Scott or Zack, tell them I sent you. They are very accurate with their machining, just tell them what you want.
If you have further questions, you can email me.
For any Pontiac blown application, I highly recommend adding a 2nd keyway on the crank snout. While you are having it machined, be sure to give the machinist your hub or balancer as well. Best to you.
|
I agree about the second keyway. 3 shops around me declined to do it. Even Butlers balked at doing it, until I said I would buy a crank if they would add a keyway to it. I did send my balancer to them and it was not returned. I had put my name on it with tape and they found it an returned it. (Mark your parts.)