Quote:
Originally Posted by Kenth
The answer is yes.
Just made a 1 3/8" steel wire gauge and it did not get pass the venturi, were a 1 5/16" gage did.
Rochester info is correct.
|
There is a lot of incorrect info out there on the Tri-Power Rochester Carbs.
The Rochester Carburetor Spec sheets I posted about years ago agree with Kenth's info.
Tom V.
So much BS out there.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|