02-09-2017, 04:00 PM
|
|
Senior Chief
|
|
Join Date: Jan 2017
Location: Chalmers, Indiana
Posts: 452
|
|
Quote:
Originally Posted by Judge-1969
Kurt, what kind of prep did you have to do to paint the firewall? Also, what kind of paint did you use and how did you apply it? I am looking to clean up and paint in my engine bay on my '71.
Thanks again for sharing your build with us. A lot of what you are doing I would like to do to mine.
Tyler
|
Tyler,
I used my 4 1/2 grinder with a wire brush on everything under the car...Also had to use a putty knife along with a hand wire brush. I also used some parts cleaner to apply where some of the grease and oil had been for THAT many years. Other than that, I used Rustoleum Semi Gloss Black on the chassis, underside, frame, and firewall. I did also use Rustoleum Matte Clear Sealer to assist with protection. This was the procedure I used on my 1968 Camaro last winter and it is holding up very nicely.
As for the grey, I used Rustoleum Smoke Grey Gloss and them sealed with the Matte Clear.
I don't have provisions to use spray gun...all of mine are done with "Rattle Cans"...
__________________
Kurt L71S....1971 LeMans Sport Coupe 350/TH350
|