Thread
:
Flywheel PRW sfi
View Single Post
#
4
10-04-2022, 12:54 PM
dhcarguy
Ultimate Warrior
Join Date: Oct 2003
Location: pa., usa.
Posts: 1,489
Mine was really tight also. I cut the heads off the old bolts and used them to guide it on. I held a cold pack on the crank while my buddy heated the flywheel with a heat gun. It went on pretty easy now with just light taps with a block of wood.
Reply With Quote
dhcarguy
View Public Profile
Send a private message to dhcarguy
Find all posts by dhcarguy