Quote:
Originally Posted by steve25
.......... It likely has a power band of 1600 to 5600 would be my bet if I was putting money down!
It should be a good Cam in a 9.5 to 1 Comp 389 or 400, or a 9 to 1 comp 421 or 428.
For me with a street 455 it’s short on duration and the .525” valve lift I would like to see even with stock iron heads!
|
This is the cam I ran on my 350 with EDL Perf RPM Round Ports... 10.5:1cr... it ran real strong. I used to have the cam card kicking around but have no idea where I placed it. It pulled strong up to 6000 rpms.
SPEED SAFE, NICK