I also was hoping to re use the valves, that being said shooting for a 1.6 installed height is getting difficult with 125-130 lbs closed valve spring 320-350lbs open. So I could always cut the valve seat .100 to make up for that problem? If I have to replace valves for longer ones do they make non dished valves as my rough estimate with a .030 over 455 and 96 heads makes like 9.37 comp with a .030 head gasket. Hate to lose any more compression with the dished valves.
Last edited by gobrdgo; 07-28-2021 at 12:56 PM.
Reason: Typo
|