Last Friday I received a box of parts from Carl. So over the weekend I pulled the fuel module and installed the fuel pressure regulator, mounted the MAP sensor, swapped out VaporWorx controllers (underneath the dash), and ran new wires from the controller to MAP sensor. It took me a total of about 3 hours, including reading through the instructions.
The good news is that the car started right up, and the fuel pressure is rock steady right where it should be. When I have some time later this week, I need to adjust the voltage on the controller and clean up some odds and ends. I'll also experiment with the pulse dampers...may not need them now.
As somewhat of an aside, Carl at VaporWorx was super helpful...he couldn't have been any more responsive, patient, and generous with his time and sending me parts...absolutely amazing customer service and a really nice person.
__________________
"If the best Mustang is the Camaro, the best Camaro is actually the Firebird" David Zenlea
|