Well have had a lot of things that have been goin on. But have made progress on the car. Did finally make it to the dyno. Made a few pulls and got some good numbers. Developed a lifter noise. Tore it down found collapsed lifter. Installed new johnson Tie bar lifters and new push rods. Added head studs and a ported inlet for the LSA charger. Smaller pulley on new snout. Have not been to dyno since the upgrades. On the dyno was running only 12 degrees of WOT timing on pump. Making about 6 pounds of boost. If I can get the uploads figured out I will post more pics. But every time I try I am getting errors. The Dyno was WOT at 3200 and ran out to 6000. Torque was 400+ from 3700-5800 WHP was over 440 and had not peaked at 6000.
|