Quote:
Originally Posted by S Courter
The pump pulley is meant to be a dry interference fit to keep it on the shaft. Using grease on the shaft is questionable. The pulley may come off easy as "butter" too. JMO
|
I'll have to disagree with ya on that one. A proper press fit isn't going to come apart because lubrication was used to assemble it. The lube just ensures that the metal doesn't gall and seize up. But I also added a retaining bolt with lock washer and blue Loctite. I guess, even though I disagreed with ya, I was a little concerned. Lol!