View Single Post
  #7  
Old 01-13-2022, 08:33 PM
madtexan's Avatar
madtexan madtexan is offline
Senior Member
 
Join Date: Oct 2003
Location: Richardson, Tx, Good old USA
Posts: 201
Default

Thanks for all the great ideas.

I did the poly bushings over 20 yrs ago when they were "the way to go". That was when I did all the suspension and power train. The boxed arms are factory and likely purchased on the PY classifieds.. There is less than 10000 miles on the car since then.

I have never removed/replaced the body mounts or checked for body centering on the frame. Good thing to check.

I'd prefer to keep from spending the $$ for aftermarket control arms and then finding out they didn't fix the issue..... Believe me I thought about it!

It feels and appears to track straight down the road and I just had an alignment a month ago so I'll call them and ask about being square if they checked that.

I know the car had been in a front pass corner accident b4 I got it. There are still slight wrinkles on top of radiator support panel.

I know I could go to 245/60/15 in rear and avoid this but I like the thicker skins.