Quote:
Originally Posted by ID67goat
You might want to check to see if the body is centered on the frame. I have a similar issue and found that the body is not quite sitting perfectly centered on the frame, and could measure this in the gap between the inner fender and frame.
|
I agree with this as a place to start. When I installed my body on the frame using the alignment holes and pins, the body was parallel to the frame but over to the passenger side by at least 1/2".
I ended up using a wooden block as a spacer between the frame and inner rocker on both sides and things ended up much better.
__________________
Michael
Oshawa built 1 option Judge basket case. 463, SD KRE 295's, CNC'd factory intake, Cliff's Qjet, Stump Puller HR cam, RARE RA manifolds, Pypes exhaust, T56 Magnum, McLeod RXT clutch, 3.42 12 bolt. 24 year project almost done...
|