Speedmaster Heads Heater Nipple
I'm installing a set of Speedmaster heads on my new build and was wondering what everyone is using for the heater nipple? The heads are threaded with what looks like 3/4" NPT, but I haven't found a direct fit part.
I'm thinking 3/4" NPT to smaller NPT reducer bushing and then just use an NPT to nipple, or AN, fitting...
__________________
No!
Do not try!
Do! Or do not.
There is no try. - Yoda
1967 Firebird Restoration 2005 - 1/25/2017
|