Quote:
Originally Posted by yellow1098
Thank you so much guys…..
Do you have a part number for those powerstop rotors 64?
JL Thank you for that info and the pads part number! Do you have one for the ACdelco rotors by chance?
Yes…I usually just follow the prescribed bedding procedure because I drive a good ways out to the track and would want them bedded first
Would you recommend those Carbotech1521’s over the Hawk pads?
Thank you so much again!
|
I don't have that part number off hand. The powerstop stuff listed before is also good, and if you want to spend a bit more I've heard very good things about the R1 concepts rotors.
I've had Hawk HP and HPS pads on various vehicles over the years and I always kick myself for not going back to the 1521's. I had those 1521's on a previous 1999 Cobra and they were just such a good performance street pad. The felt really great, didn't squeak and I wasn't polishing wheels all the time.
My experience with the HP and HPS pads is dusty and squeaky, especially the HPS. They stopped fine though.