Quote:
Originally Posted by judgeman6970
Thanks for the info, guys. It's a stock rebuild, basically a street cruiser. Wasn't looking to spend $700-800 on forged pistons, if I can help it. The L2262F's do seem like a reasonable choice, but compression may be an issue. I assume these 2262's would give me approximately "stock compression", all other things being equal?
|
Use an online CR calculator to figure the compression ratio. Figure 8ccs for the 2262 valve reliefs. If you have access to 92-ish octane fuel, build for a SCR of about 9.7-9.9:1. DON'T leave out zero decking the block and choose a cam wisely or it'll wind up being a pinging turd.