![Old](images/SultanThemeVB3R/statusicon-red/post_old.gif)
04-29-2024, 07:58 PM
|
![79 Phoenix's Avatar](image.php?s=0c44818daf995b967a1fd1bcc732be0f&u=169288&dateline=1676726531) |
Senior Chief
|
|
Join Date: Dec 2010
Posts: 394
|
|
I patched the floor using a couple layers of fiberglass mesh with resin. Worked great just like the several holes in the trunk. I painted with Rustoleum rusty metal primer. I also undercoated the patched areas underneath and still need to do touchup black underneath.
After taking care of a few details underneath with the speedometer cable clips and parking brake cables I will move to the wiring and gauges.
I now have both the new engine harness and front lighting harness. I will plug them both into the firewall bulk head . For now I will hook up the engine wiring, starter, oil pressure, volt and water temp gauges.
The fuses in the fuse block have been in there at least 33 years... I guess I should replace them all.
Also, I stopped by a local exhaust fabricator today and it looks like when the time comes I will have them make a 2 1/2 system using Flowmaster mufflers.
I need to buy a battery because I will need one soon! ![Smile](images/smilies/smile.gif)
Last edited by 79 Phoenix; 04-29-2024 at 08:04 PM.
|