Thanks for the replys,
I did a compression test with my $25 kit today.
There are some differences in psi.
I am warming to the idea of replacing the existing QFT.
I will look for qjet carbie second hand .
I need to do some research.
I might advertise for a carbie in parts wanted.
Also the height of the high-rise intake makes it a hassle with hood fitment. Air filter not getting good air ,the lid for air cleaner is very perforated with not much filtration. The hood sits on top of the lid.
It was asking me to cut a hole in the hood. That was never going to happen.
Thoughts on compression numbers,
I'm hoping not to rebuild. The new carbie set up is a cheaper option .
John L.
Sent from my SM-X200 using Tapatalk