Quote:
Originally Posted by DonnyD
I didnt want to go with an electronically shifted tranny. The 200-4r i am getting is an art carr unit from california performance. theyre supposedly good for up to 750 hp. I know im asking alot. I dont want to be too unrealistic. I spent enough cash as is but will spend a little more to try and reach my goal. A similar build with a similar cam made 578 hp with a 850 edelbrock carb, so i think i should be close to 600 when everything is said and done. I just wish i knew more about camshafts before placing that order. I just feel like im leaving some hp on the table with my cam and possibly the intake too. My engine builder felt better about using the performer versus a torker 2
|
If you check, both Tremec and GM rate trans by torque capacity. A 750 HP SBC will not be making as much torque as your 600 HP Pontiac.
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm