Thread
:
RPM Intake / PCV location?
View Single Post
#
25
03-07-2024, 01:01 PM
Tim Corcoran
Ultimate Warrior
Join Date: Jan 2000
Location: Willow Spring, North Carolina
Posts: 4,773
If you have the hood clearance you can put a spacer between the carb and the manifold and drill and tap the spacer in the back or front. this would give you pretty good distribution.
__________________
Tim Corcoran
Reply With Quote
The Following 2 Users Say Thank You to Tim Corcoran For This Useful Post:
1968GTO421
,
indymanjoe
Tim Corcoran
View Public Profile
Send a private message to Tim Corcoran
Find all posts by Tim Corcoran